York Furnace Light Codes
Did you fix the flashing red light of York Gas Race 9 error code? 3
Error code 9 flashing red light (ground wire or polarity issue) on York GY9 90+ printer cannot be corrected. The unit has only 2 wires (black and white) without green wire (green). The land appears on the control panel. I am connecting my wires to the circuit breaker with my black wires in the control box, my white wires to the ground connection of the insulated copper which is in a different place but on the same ground. The tse wires go to the junction box, where I go from Romex to the MC wires in the circuit box and screw the black to black, white to white, and non-insulated copper wires into the insulated green. It puts sw, blk, blk devices, ... rt side of the SW flip flop and e devices under this SW flip flop. The device continues to turn green and connects to the metal finish on the device below the gas line area. Error code 9 appears. I changed the polarity at the junction box where my Romax changed to MC and I still have the same error. I checked my country in different places ... same mistake. It has 120V on the control board and transformer, which cuts to 28V on the other side. I'm still resetting the safety switch to stop and fix the power supply ... Error 9 on ... What am I missing here?
Make sure the burner ground wire is clean and tight, or In will not recognize that it is on fire.
The diagnosis is that the console is probably in the red color of the Xbox 360. This is because when you check the bug report, your Xbox 360 will probably detect the cause of the red light flashing on the Xbox 360 3, this is a "common error" which is another name for red light. This is usually due to overheating, but there may be other reasons as well. I would suggest sending it to Microsoft as the chances of a successful self-repair are very low.
